Daily Language Practice For Kindergarten: Week 9

How Does A Hot Tap Work?

Hot tapping is also known as wet tapping. It is a way to lớn tap into a water line while it is under pressure and add a line, drain the system or add a Thermowell or sensor. You place a hot tap service saddle or sleeve onkhổng lồ the line. You add a valve sầu & test the connection under pressure with a hydrostatic pump. Then you place the hot tap machine onto the value through a water tight packing gl&, open the valve và lower the cutter & retention pilot down until it touches the pipe. You then drill into the pipe manually or with an electric or air driven unit that cuts a hole in the pipe. The retention pipe grabs the cut out coupon so it doesn’t fall down inlớn the pipe where it could cause a problem down he line. You then retract the cutter và pilot up inkhổng lồ the hot tap machine, cđại bại the valve sầu và you have completed a hot tap.


Bạn đang xem: Daily language practice for kindergarten: week 9


PS 3425 SS Tapping Sleeve for Copper Tubing

Recommended For: Copper Tubing

• Available 3/4" to 8" dia & size-on-size: 3/4" dia x 3/4", lớn 4.00" dia x 4.00"• Suitable for Water, Sewer (150 PSI)• Exact fit Full Circle GorillaGrip™ Buna-N Waffle Gasket Design Rated -40° lớn +180° F sustained• NSF ANSI 61 và 61G Certified by WQA

PS 3425 S/S Tapping Sleeve sầu for Steel/PVC Pipe

Recommended For: Steel and PVC Pipe

• Available 3/4" khổng lồ 8" dia và size-on-size: 3/4" dia x 3/4", to 4.00" dia x 4.00"• Suitable for Water, Sewer (150 PSI)• Exact fit Full Circle GorillaGrip™ Buna-N Waffle Gasket Design Rated -40° khổng lồ +180° F sustained• NSF ANSI 61 and 61G Certified by WQA
*

JCM 412 Carbon Steel Flanged Tapping Sleeve sầu with Shop Coat

Recommended For: DI, C900, HDPE, SS, và Thin Wall Pipe

• Available 6"-30" with flanged outlet sizes 3.00"-12.00" (14"-60" w/ flanged outlets 3.00"-12.00" for HDPE)• Suitable for Water, Sewer to 175 PSI maximum for 3.00" to lớn 12.00" (Điện thoại tư vấn for rating on larger sizes)• NBR Outlet Seal Rated -40° khổng lồ +212° F with 3/4” Forged Steel demo Outlet• NSF ANSI 61 Certified by NSF
*

JCM 418 Carbon Steel Threaded Outlet Tapping Sleeve

Recommended Primarily For: Steel, PVC, DI, and Thin Wall Pipe

• Available 2"-54" with 3/4"-4.00” IPhường Thread Outlets – Avalable with optional Epoxy Coating or SS Hardware• Suitable for Service Connections, Air Relief Valve Connections, taps on larger A/C, CI, DI, PVC & RCPhường Pipe• NBR Outlet Seal Rated -40° khổng lồ +212° F Rated up to 250 PSI maximum• NSF ANSI 61 Certified by NSF
*

JCM 432 All Stainless Steel Flanged Tapping Sleeve with Full Circle Gasket

Recommended For: Steel, PVC, C900, DI, CI, ACPhường, RCPhường và Thin Wall Pipe in corrosive sầu conditions

• Available 4.00" lớn 24.00" with outlet sizes 2.00" to lớn 8.00" including size-on-kích cỡ up to 8x8• Suitable for Service Connections, Air Relief Valve Connections, taps on larger A/C, CI, DI, PVC & RCP Pipe• SBR Full Circle Gasket Rated -40° to +150° F & Rated up to lớn 250 PSI maximum• NSF ANSI 61 Certified by NSF
JCM 452 All Stainless Steel Flanged Tapping Sleeve with Outlet Seal Gasket

Recommended For: DI, PVC, PE & Steel Pipe for Higher Safety & Pressure Capability

• Available 4.00" khổng lồ 30.00" with outlet sizes 3.00" lớn 12.00" including size-on-size up lớn 12x12• Suitable for Service Connections, Air Relief Valve sầu Connections, taps on larger A/C, CI, DI, PVC and RCPhường Pipe• SBR Full Circle Gasket Rated -40° to lớn +150° F và Rated up to 250 PSI maximum • NSF ANSI 61 Certified by NSF
JCM 438 All Stainless Steel Threaded Outlet Tapping Sleeve

Recommended Primarily For: Steel, PVC, DI, & Thin Wall Pipe in corrosive sầu conditions

• Available 2"-54" with 3/4"-4.00" IPhường. Thread Outlets• Suitable for Service Connections, Air Relief Valve Connections, taps on larger A/C, CI, DI, PVC and RCPhường Pipe• NBR Outlet Seal Rated -40° to +212° F and up to 250 PSI maximum• NSF ANSI 61 Certified by NSF
JCM 422 Carbon Steel Flanged Tapping Sleeve with Epoxy Coat

Recommended For: Steel & PVC Pipe (Exact fit O.D.)

• Available 6"-30" with flanged outlet sizes 3.00"-12.00" (14"-60" with flanged outlets 3.00"-12.00" for HDPE)• NBR Outlet Seal Rated -40° to lớn +212° F • NSF ANSI 61 Certified by NSF• Optional: Epoxy Coat và Bolts (EEB), và Epoxy Coat và S/S Bolts (ESS)
JCM 402 DI Service Saddle with Double Coated Straps

Recommended For: Steel, DI, CI, & ACPhường. Pipe

• Available 2.00" khổng lồ 24.00" with Female IP Thread Outlets from 3/4" to 2-1/2"• NBR Outlet Seal Rated -40° to lớn +212° F• Working pressure is 250 PSI hydrostatic• NSF ANSI 61 & ANSI 61G Certified by NSF
JCM 404 DI Service Saddle with Double Stainless Steel Straps

Recommended For: Steel, DI, CI, ACPhường, PVC, và C900 Pipe

• Available 2.00" lớn 24.00" with Female IPhường. Thread Outlets from 3/4" khổng lồ 2-1/2"• NBR Outlet Seal Rated -40° to +212° F• Working pressure is 250 PSI hydrostatic• NSF ANSI 61 and ANSI 61G Certified by NSF
JCM 406 DI Epoxy Coated Service Saddle with Double Stainless Steel Straps

Recommended For: Steel, DI, CI, ACP., PVC, & C900 Pipe

• Available 2.00" lớn 24.00" with Female IP Thread Outlets from 3/4" to lớn 2-1/2"• NBR Outlet Seal Rated -40° to lớn +212° F• Working pressure is 250 PSI hydrostatic• NSF ANSI 61 và ANSI 61G Certified by NSF
JCM 408 DI Epoxy Coated Service Saddle with Electro Galvanized Double Straps

Recommended For: Steel, DI, CI, and ACP. Pipe

• Available 2.00" to 24.00" with Female IP. Thread Outlets from 3/4" lớn 2-1/2"• NBR Outlet Seal Rated -40° to +212° F• Working pressure is 250 PSI hydrostatic• NSF ANSI 61 và ANSI 61G Certified by NSF
Smith Blair 313 Ductile Iron Double Bale Service Saddle

Recommended For: Steel, DI, CI, và ACP Pipe

• Available 1-1/4" to lớn 24.00" with Female IPhường Thread Outlets from 3/4" lớn 4.00"• Smith-Blair Nitrile ( Buna-N) Temperature range -20° F khổng lồ 180° F • Working Pressure is up to lớn 300 PSI hydrostatic• Certified to lớn NSF / ANSI 61
Smith Blair 317 Double S/S Strap Ductile Iron Body Service Saddle

Recommended For: Steel, DI, CI, và ACPhường Pipe

• Available 1-1/4" khổng lồ 2400" with Female IPhường Thread Outlets from 3/4" to lớn 4.00"• Smith-Blair Nitrile ( Buna-N) Temperature range -20° F to 180° F • Working Pressure is up to 300 PSI hydrostatic• Certified to lớn NSF / ANSI 61
Smith Blair 357 Service Saddles for Plastic or Steel Pipe

Recommended For: PVC & Steel Pipe (Not for Ductile Iron Pipe)

• Available 6.00" to 12.00" with Female IP Thread Outlets from 3.00" to lớn 4.00"• Smith-Blair Nitrile ( Buna-N) Temperature range -20° F to lớn 180° F • Working Pressure is up khổng lồ 150 PSI hydrostatic• Certified to NSF / ANSI 61

Xem thêm: Top 22 Phim Hay Mỗi Ngày Videos, Phim Hay Mỗi Ngày

JCM 416 Fabricated Carbon Steel Weld On Tapping Outlets

Recommended For: Steel Pipe

• Available 4.00" to lớn 12.00" with Flanged Outlets from 3.00" to 12.00"• Suitable for Water, Tank và Bulkhead and other applications • Rated to 175 PSI with Standard AWWA ANSI 150lb outlet flange• NSF ANSI 61 và ANSI 61G Certified by NSF
TapMaster TM-1 Pro - The Professional Hot Tap Machine

Recommended For: Copper, Steel, PVC, C900, CI, và DI Pipe

• Professional Three Rail System with 1/2" Hole Hawg Electric Drive sầu Motor• 3/4"-4.00" Threaded & 6.00" Std & MJ Flanged Taps• Designed for drilling holes in active water, sewer & air lines• Available in Multi-configurations
TapMaster TM-1 Pro Hot Tap Machine Accessories

Comtháng Accessories Include:

• NPT & Flanged Adapters• Boring Bars• Hot Tap Cutters• Coupon Retention Pilots
ThermSetter Live sầu Thermowell Installer

Recommended For:

• Tubular fittings used khổng lồ protect temperature sensors• Subject to lớn both hydrostatic and aerodynamic forces• Protects the instrument thermometer, thermocouple or resistance temperature detector• For use with TM-1 Pro or M80 Series Hot Tap Systems
ThermFit Carbon Steel Live Weld-on Thermowell Fittings

Recommended For:

• Precision Carbon Steel construction• Available in Carbon Steel or 304 Stainless Steel Construction• Sizes: 2.0" x 1/2" và 2.0" x 3/4"• Made in the USA
Wheeler Rex 8100 NPT Portable/Manual Hot Tap Machine

Recommended For: Copper, Steel, PVC, C900, CI, và DI Pipe Taps

• Available lớn bởi vì 3/4" to lớn 2.00" NPT Hot Taps• Base unit comes with 3/4" and 1.00" NPT Adapters with Bleed Valves and HSS Cutters• Designed for drilling holes in active water/sewer lines up lớn 250 PSI• Limited Lifetime Warranty
Wheeler Rex 8200 CTS Portable/Manual Hot Tap Machine

Recommended For: Copper (CTS) Flare Taps

• Available to lớn vì chưng 3/4" lớn 2.00" CTS Hot Taps• Base unit comes with 3/4" và 1.00" CTS Flare Adapters with Bleed Valves và HSS Cutters• Designed for drilling holes in active sầu water/sewer lines up to lớn 250 PSI• Limited Lifetime Warranty
Wheeler Rex Portable/Manual Hot Tap Machine Accessories

Comtháng Accessories Include:

• Adapters• Replacement Parts• Hot Tap Cutters• Coupon Retention Pilots
Reed Feed Tap System

Recommended For: PVC, PE, Cast Iron, Ductile Iron & Steel Pipe

• Reed 2000 AWWA & the 2000-110 Complete Feed Tap Systems 3/4" - 2.00"• For use with a corporation stop inserted inlớn a service saddle• Compact kiến thiết for portable tapping• Independant Feed Control
Blu-Mol Bi Metal Hole Saw

Recommended For: steel, aluminum, brass, cast iron, plastic or wood

• 1-7/8" cutting depth (Deepest standard cutting depth available)• Available in 9/16" to lớn 6.00" diameters• M-42 Cobalt Bi-Metal Construction - Up to 24% Longer Life• 4/6 variable tooth design và Thin 0.044" Kerf for faster & smoother cuts
Blu-Mol Carbide Tipped Hole Saw

Recommended For: Wood laminates, fiberglass, plywood or tile.

• 1-5/8" cutting depth (Deepest standard cutting depth available)• Available in 11/16" khổng lồ 6.00" diameters• 3 teeth per inch for smoother cut• Provides up to 10 times greater tool life on abrasive materials
Blu-Mol Hole Saw Kits

Recommended For: steel, aluminum, brass, cast iron, plastic or wood

• 1-7/8" cutting depth (Deepest standard cutting depth available)• M-42 Cobalt Bi-Metal Construction - Up lớn 24% Longer Life• Available in 7 to 20 piece kits for electrical, plumbers etc.• Includes: Mandrels, Adapters and Carrying Case
TapMaster™ Xtra Deep Bi Metal Hole Saw

Recommended For: steel, aluminum, brass, cast iron, plastic or wood

• Available in 7/8" dia khổng lồ 6.00" diameters và 3.25, 4.50 or 6.00" Drill Depths• M-42 Cobalt Bi-Metal Construction - Up to lớn 24% Longer Life• Uses any standard or Heavy Duty Mandrel• 4/6 variable tooth thiết kế and thin 0.044" Kerf for faster and smoother cuts
TapMaster™ Xtra Deep Carbide Hole Saw

Recommended For: Wood laminates, fiberglass, plywood or tile

• Available in 7/8" dia to 6.00" diameters và 3.25, 4.50 or 5.70 Drill Depths• Carbide-Tipped teeth: Efficiently cut abrasive sầu materials• 3 teeth per inch for smoother cut• Provides up lớn 10 times greater tool life on abrasive materials
STHS Carbide Hot Tap và Line Stop Cutter

Recommended For: Primary Hot Tap use on: ACPhường, CI, DI, CLMC, & PCCPhường Pipe

• Relton STHS Hot Tap Cutters made specifically for TM-1 Pro Series Hot Tap machine• Carbide Tipped Shell Cutters with standard 5-hole or 7-hole hole saw back-plate• Select Hot Tap Sizes for 4.00" to lớn 6.00" Hot Taps with 3.375" drill depth• Can be re-tipped or resharpened
Mighty Deep™ Bi Metal 3.25" Deep

• Cobalternative text Bi-Metal Construction• Creates sharper, longer lasting teeth• 3.25" or 3.75" Drill Depth• High Speed cutting edge
Mighty Deep™ Carbide 3.25" Deep

• Carbide-Tipped teeth: Efficiently cut abrasive materials• Creates sharper, longer lasting teeth• 3.25" or 3.75" Drill Depth• High Speed cutting edge
Relton Carbide Hole Saws – 6 Styles to Choose From

Recommended For: metal, plastic, wood, laminates, tile & more

• Stoông xã sizes 11/16" to 4" diameters• Complete - Includes carbide hole saw, 1/2x3 Shank, Ejector Spring, and Steel pilot• HO - Only includes carbide hole saw• Special order up khổng lồ 40" diameter and 48" drill depth
Blu-Mol Hole Saw Accessories

Recommended For: All Blu-Mol Standard Hole Saws

• Works with all Standard Hole Saws• Arbors• Pilots
TapMaster Steel Hot Tap Pilots

Recommended For: Steel, Copper, Aluminum, Brass, PVC or C900 Taps

• Enhances the capture of the coupon & helps eliminate the cost of recovering a dropped "Cookie"• Short Flute, Heavy Duty Steel Pilots with flats(s)• Available in 1/4"x3-1/4", 1/4"x4-1/4", 3/8"x4-1/4", 3/8"x5-1/8", 3/8"x6-1/8", 1/2"x4-1/4", 1/2"x5", & 1/2"x6"• Works for all kích cỡ hot taps with the TM-1 Pro Series Hot Tap System
TapMaster Carbide Tipped Hot Tap Pilots

Recommended For: C/I, D/I, A/C, PVC, và CMLS Pipe

• Enhances the capture of the coupon & helps eliminate the cost of recovering a dropped "Cookie"• Short Flute, Heavy Duty Carbide Tipped Pilots with flats(s)• Available in 3/8" x 4-1/4", 3/8” x 5”, 3/8" x 6", 1/2" x 4-1/4" , 1/2" x 5" and 1/2" x 6"• Works for all form size hot taps with the TM-1 Pro Series Hot Tap System

Selling Innovative Pipeline Products Since 2001